How to set up recovery services for the NetCommunity Service
To setup automated restart of NetCommunity Services please follow the steps below: 1. Click Start -> Run. 2. Type "services.msc" and click Ok. 3. Right click on Blackbaud NetCommunity Service and click properties. 4. Click on the Recovery tab. 5. Set the action for the First Failure and Second Failure to Restart the Service. 6. Set the action for Subsequent Failures to Take No Action. 7. Set the Restart Service After timer to 5 minutes to allow the service time to reconnect if it is just a temporary connection issue.