Check to see if there is a separator for the last dimension under General Ledger, Maintenance, ID Types, Account Structure tab. If there is, the separator needs to be removed. 

If there is not a separator after the last dimension, skip to step 7 below, Synch Accounts in Division Maintenance.

1.  Have all users sign out of FundWare and verify there is a good backup.
2.  Select File, Open FundWare.
3.  Verify that 00 - System Administration appears in the drop-down menu and click OK.
4.  Select System Administration, System Utilities.
5.  Enter the following in the Execute Program portion of the screen:
        Program Name                  cst208
       Switches                           20
       Parameters                       gls,df
       Business Date                  Use today's date
       Division                            Select the appropriate division.
        - Click Run.
       - Select C to change, enter ID Type, change field 8, removed the dash at end of the last dimension, enter to end of field, select 0 to accept, E to end.
 6.  Enter the following in the Execute Program portion of the screen:
       Program Name                  cst900
       Switches                           <blank>
       Parameters                        cst902
       Business Date                   Use today's date
       Division                             Select the appropriate division. 
       - Click Run.
       - Press Enter and select Yes.
 
7.  Synch Accounts again in the Division Maintenance. 

8.   In FI, select the account number.