1. Open Div 00 - System Administration.
  2. Click Security, Users.
  3. At the bottom of the screen, leave the business date alone, select your Division and click Define User Security.
  4. Type C to change.
  5. Enter the user number and press Enter.
  6. At the Enter field to be changed prompt, type 2 and press Enter.
  7. Type the current user password, press Enter, and type in the password  again.
  8. Press Enter.
  9. At the Enter field to be changed prompt, type 0 and press Enter.
  10. You will see the User has been changed message at the bottom of the screen.
  11. Press Esc.
  12. Type E to End.

If the above steps do not resolve this message, do the steps below:

1.  Log into Division 00 System Administration.
2.  Click System Utilities.
3.  In the Execute Program section, enter the following:

          Program Name: raminit
          Switches:  <blank>
          Parameters:  <blank>
Business Date:  Leave as default date
Division: Enter the appropriate division.

4.  Click Run.
5.  Press Enter when the black screen says Process successfully completed.
6.  In the Execute Program section, enter the following:

          Program Name: nws208
          Switches:  20
          Parameters:  <blank>
Business Date:  Leave as default date
Division: Enter the appropriate division.

7.  Click Run.
8.  Type in C to Change.
9.  Type in the user ID number and press Enter.
10. Type in 0 and press Enter to accept the changes
11. Press ESC and E to End.

Have the user log out of FundWare and log back in to have the change take effect.