1. In FundWare, select File, Print Manager
2. Open the check file
3. Place the cursor at the front of the information that is incorrect
4. Note the Line (Row) and Column
To correct/verify the mapping in Advance Printer Control:
1. Open Advance Printer Control, Form Set Up
2. Select the form and open
3. Click the Design button
4. Click on the incorrect section to outline in red
5. Right click in the red box and select Properties
6. Verify the Row and Column are the same as the line and column in the print file.
If they are not, edit them to the values noted from the check print file.
7. Create a check in Advance Printer Control to verify the information is correct.