1. Go to Query and click New
  2. Query type = Vendor
  3. Query format = Dynamic
  4. Click OK
  5. On the Criteria tab, expand on Vendor and select Vendor ID
  6. Set the Operator to Equals and enter the vendor's ID
    • You can also select name. Select Vendor Name and set the Operator to Contains and enter in a portion of the name
  7. Click OK
  8. On the Output tab, expand on Vendor and select Vendor Name
  9. Click Run
  10. Double-click on the vendor name in the results tab to open the record.
  11. Click Save and Close
  12. Now search for the vendor again and it notice that it now shows in the list