To set a Logo and/or Seal as the Default (or remove the Default setting):
  1. Navigate to Core.
  2. Select Settings > Logos and Seals.
  3. Locate the Logo and/or Seal that says (Default Logo) and/or (Default Seal) after the Name

User-added image
  1. Click the yellow pencil/Edit icon in the upper right corner.
  2. Change Default Logo and/or Default Seal to No.
  3. Click Save & Close.
  4. This will remove the Logo and/or Seal from displaying on all forms.

To Add a new Logo and/or Seal:
  1. Navigate to Core.
  2. Select Settings > Logos and Seals.
  3. Click the +Add New button in the upper right corner.
  4. Give the Logo/Seal a Name.
  5. Add your image via drag/drop, or click the Select From Your Computer button.
  6. Set the Default Logo/Default Seal option to Yes if this should be your default Logo and/or Seal.
  7. Click Save & Close.
Note: The images must be filetype .jpg or .png saved for the web. Suggested Maximum Image Size for Logo is 192 x 96 pixels (72 dpi) and 2 x 1 inches. Suggested Maximum Image Size for Seal is 384 x 384 pixels (72 dpi) and 4 x 4 inches.


To Remove a Logo and/or Seal:
  1. Navigate to Core.
  2. Select Settings > Logos and Seals.
  3. Click the red "x" button in the upper right corner of the Logo/Seal.
  4. Click Confirm to confirm you want to remove the logo/seal from your site. This cannot be undone.